|
Testimonial
Ron Cameron has been a valuable asset to our company for years. His products have always performed as promised, and he has always been available for questions. Ron brings us great knowledge of products and procedures related to all kinds of finishes. I rarely call that I don’t speak to him immediately, and when I do leave a message it is promptly returned. Ron and Finishes 1st have been the preferred supplier for Jeremiah Johnson Log Homes and Anderson Custom Homes for years, and we see no end to this great relationship."
Dennis Anderson
Jeremiah Johnson Log Homes
Anderson Custom Homes
Evergreen, CO
www.liveinlog.com
|
 |
|
 |
|
|
Trade Shows 2011
Abbotsford, BC
Log & Timber Show
March 13-15
at Tradex
Gibsons, BC
Coast Community Builders Association Home Show
June 4, 2011
|
|
|
 |
|
 |
 Authorized Distributor
|
 |
|
 |
|
Timber Chink™ is our market leading latex chink which is formulated to provide the best possible chemistry, resulting in ease of application, tooling and long term performance for all types of log structures.
Product Description
Timber Chink™ is a flexible, textured chinking that seals the gaps between logs to eliminate heat loss, air and pest infiltration. Timber Chink is designed to work on all types of log structures. Timber Chink is a premium acrylic latex elastomeric sealant that provides the highest degree of durability, flexibility and resistance to cracking caused by log movement and weather. Timber Chink maintains its pliable nature after full cure.
General Production Information
Colors: Marble White, Gray Stone, Sandstone Flagstone, Brownstone, Mortar White, Buff, Tan, Woodtone Cedar.
Packaging: 5-gallon pails and 29 fluid oz. fiber cartridges (10 per carton)
Shelf Life: 12 months from purchase when stored in a tightly sealed container between 45°F and 90°F.
VOC: 32 grams/liter
Cure Time: 3 weeks (1/2” thickness, 77°F, 50% relative humidity). Timber Chink is tack-free in 1-2 hours.
Freeze-Thaw: Passes 5 cycles
Slump: <1/16” (ASTM D2202)
Viscosity: 450,000 cps (Brookfield #5)
Service Range: -30°F to 220°F
Application Range: 40°F to 95°F
Weathering: No washout, no cracking and no discoloration. UV resistance QUV (1000 hours) testing shows no effect.
Compatibility: Compatible with most sealers, preservatives and stains. Some coatings contain wax or petroleum based oils that can make adhesion more difficult.
Hazard Warning
Health 1
Flammability 0
Reactivity 0
Precautions
Do not take internally. Keep out of the reach of children.
Note: Do not let product freeze.
|
 |
Designed to be a premier product:
- permanently flexible and pliable after full cure even at low temperatures.
- high solids content, reduced shrinkage
- creamy consistency, easiest product on the market to apply
- advanced mildew and fungal inhibitors
- paint-able and stainable
- soap and water clean-up
Performance Standards
Timber Chink is formulated to surpass the performance requirements of the accepted industry standards for adhesion, elongation and tensile strength.
- ASTM C834 – Latex Sealants
- ASTM D638 – Tensile Properties (elongation: 240%, tensile strength: 40 lbs/in2)
- ASTM C920(12.5) – Elastomeric Joint Sealant
|
|
 |
|
 |
|
|
News Flash
Finishes 1st is now your Sunshine Coast, B.C.
source for:
British Columbia
Timberframe,
Goat Lake Forest Products,
Mitten Vinyl Products
and
Other Building
Materials.
For more information on these new products go to:
bctimberframe.ca
goatlake.com
mittenvinyl.com
For more information on pricing, availability, etc. call
Finishes 1st.
at 604-740-0906
We also offer:
Maxi,
James Hardie,
and CertainTeed Composite Siding,
Trim & Shakes
(individual and panel)
maxtile.com
certainteed.com
jameshardie.ca
Our goal is to offer you higher quality products at or below the prices that you're used to from your local chain store.
Our website is being continually updated with our new product lines. Come back often and check us out!
|
|
